Pickup Flatwork · WT-JM

Jazzmaster® Flatwork Set

$3.25

per set

Precision-cut top and bottom flatwork for Jazzmaster®-style pickup builds. Designed for the wide, shallow bobbin geometry of traditional Jazzmaster® pickups.

One set includes 1 top + 1 bottom flatwork. Eyelets are included with the flatwork set. Pole pieces, magnets, wire, and other pickup components are not included.

$3.25 per set at any quantity. Canadian taxes are calculated at checkout where applicable.

0.187" / 4.75 mm pole holes Fixed pole-piece size

2.00" / 51.0 mm E-to-E Jazzmaster® pole spacing

Wide, shallow geometry Traditional Jazzmaster® format

Matched jig available Pairs with WT-JM Assembly Jig

Built for pickup makers

Jazzmaster® flatwork, ready for your build.

Precision-cut flatwork designed for the wide, shallow geometry of Jazzmaster®-style pickups, helping maintain consistent spacing and bobbin dimensions from one build to the next.

Flatwork specifications

Pole piece diameter 0.187 in / 4.75 mm

E-to-E center spread 2.00 in / 51.0 mm

Top flatwork 0.093 in / 2.36 mm

Winding cavity 0.1.57 in / 4 mm

Bottom flatwork 0.093 in / 2.36 mm

Total stack 0.343 in / 8.72 mm

What you get

Only the flatwork you need.

1 × Top Flatwork

Choose grey or black.

1 × Bottom Flatwork

Choose grey or black independently.

Eyelets included

Eyelets are included with all Winder Tooling flatwork sets. Pole pieces, magnets, wire, and other pickup components are sold separately.

Matching tooling

Built to pair with the Jazzmaster® Assembly Jig.

Use the matching Winder Tooling assembly jig to keep the top and bottom flatwork aligned while installing the pole pieces and assembling the bobbin.

Need the assembly jig?

Pair this flatwork with the Winder Tooling Jazzmaster® Assembly Jig.

VIEW ASSEMBLY JIG

Jazzmaster® is a trademark of Fender Musical Instruments Corporation. Winder Tooling is not affiliated with, sponsored by, or endorsed by Fender. The trademark is used solely to identify product compatibility.