Pickup Flatwork · WT-JG

Jaguar® Flatwork Set

$2.54

per set

Precision-cut top and bottom flatwork for Jaguar®-style single-coil pickup builds. Made for repeatable bobbin assembly and consistent pole-piece alignment.

One set includes 1 top + 1 bottom flatwork. Eyelets are included with the flatwork set. Pole pieces, magnets, wire, and other pickup components are not included.

$2.54 per set at any quantity. Canadian taxes are calculated at checkout where applicable.

0.187" / 4.75 mm pole holes Fixed pole-piece size

2" / 51.0 mm E-to-E Jaguar® pole spacing

Grey or black Choose top and bottom independently

Matched jig available Pairs with WT-JG Assembly Jig

Built for pickup makers

Jaguar® flatwork, ready for your build.

Precision-cut flatwork for repeatable Jaguar®-style single-coil pickup assembly, helping maintain consistent spacing and bobbin geometry from one build to the next.

Flatwork specifications

Pole piece diameter 0.187 in / 4.75 mm

Winding cavity 0.469 in / 10.8 mm

Top flatwork 0.062 in / 1.57 mm

E-to-E center spread 2 in / 51.0 mm

Bottom flatwork 0.093 in / 2.36 mm

Total stack 0.62 in / 14.73 mm

What you get

Only the flatwork you need.

1 × Top Flatwork

Choose grey or black.

1 × Bottom Flatwork

Choose grey or black independently.

Eyelets included

Eyelets are included with all Winder Tooling flatwork sets. Pole pieces, magnets, wire, and other pickup components are sold separately.

Matching tooling

Built to pair with the Jaguar® Assembly Jig.

Use the matching Winder Tooling assembly jig to keep the top and bottom flatwork aligned while installing the pole pieces and assembling the bobbin.

Need the assembly jig?

Pair this flatwork with the Winder Tooling Jaguar® Assembly Jig.

VIEW ASSEMBLY JIG

Jaguar® is a trademark of Fender Musical Instruments Corporation. Winder Tooling is not affiliated with, sponsored by, or endorsed by Fender. The trademark is used solely to identify product compatibility.