Pickup Flatwork · WT-ST

Stratocaster® Flatwork Set

$2.54

per set

Precision-cut top and bottom flatwork for Stratocaster®-style single-coil pickup builds. Choose the colour of each piece independently to match your pickup design.

One set includes 1 top + 1 bottom flatwork. Eyelets are included with the flatwork set. Pole pieces, magnets, wire, and other pickup components are not included.

$2.54 per set at any quantity. Canadian taxes are calculated at checkout where applicable.

0.187" / 4.75 mm pole holes Fixed pole-piece size

2.04" / 52 mm E-to-E Stratocaster® pole spacing

Grey or black Choose top and bottom independently

Matched jig available Pairs with WT-ST Assembly Jig

Built for pickup makers

Stratocaster® flatwork, ready for your build.

Precision-cut flatwork for repeatable Stratocaster®-style single-coil pickup assembly. Choose grey or black independently for the top and bottom pieces.

Flatwork specifications

Pole piece diameter 0.187 in / 4.75 mm

E-to-E center spread 2.04 in / 52 mm

Top flatwork 0.062 in / 1.57 mm

Winding cavity 0.44 in / 11.1 mm

Bottom flatwork 0.093 in / 2.36 mm

Total stack 0.59 in / 15.03 mm

What you get

Only the flatwork you need.

1 × Top Flatwork

Choose grey or black.

1 × Bottom Flatwork

Choose grey or black independently.

Eyelets included

Eyelets are included with all Winder Tooling flatwork sets. Pole pieces, magnets, wire, and other pickup components are sold separately.

Matching tooling

Built to pair with the Stratocaster® Assembly Jig.

Use the matching Winder Tooling assembly jig to keep the flatwork and pole pieces aligned during bobbin assembly.

Need the assembly jig?

Pair this flatwork with the Winder Tooling Stratocaster® Assembly Jig.

VIEW ASSEMBLY JIG

Stratocaster® is a trademark of Fender Musical Instruments Corporation. Winder Tooling is not affiliated with, sponsored by, or endorsed by Fender. The trademark is used solely to identify product compatibility.