Pickup Flatwork · WT-TB-FW
Telecaster® Bridge Flatwork Set
$2.54
per set
Precision-cut top and bottom flatwork for Telecaster® bridge pickup builds. Choose the colour of each piece independently to match your pickup design.
One set includes 1 top + 1 bottom flatwork.
Eyelets are included with the flatwork set.
Pole pieces, magnets, wire, and other pickup components are not included.
$2.54 per set at any quantity. Canadian taxes are calculated at checkout where applicable.
0.187" / 4.75 mm pole holes
Fixed pole-piece size
Grey or black
Choose top and bottom independently
Precision-cut flatwork
Made for repeatable pickup assembly
Matched jig available
Pairs with WT-T-B Assembly Jig
Built for pickup makers
Telecaster® bridge flatwork, ready for your build.
Choose grey or black independently for the top and bottom pieces. Mixed-colour sets are available at no additional charge.
Flatwork specifications
Pole piece diameter
0.187 in / 4.75 mm
E-to-E center spread
2.165 in / 55.00 mm
Top flatwork
0.062 in / 1.57 mm
Bottom flatwork
0.093 in / 2.36 mm
What you get
Only the flatwork you need.
1 × Top Flatwork
Choose grey or black.
1 × Bottom Flatwork
Choose grey or black independently.
Eyelets included
Eyelets are included with all Winder Tooling flatwork sets. Pole pieces, magnets, wire, and other pickup components are sold separately.
Matching tooling
Built to pair with the Telecaster® Bridge Assembly Jig.
Use the matching Winder Tooling assembly jig to keep the flatwork and pole pieces aligned during bobbin assembly.
Need the assembly jig?
Pair this flatwork with the Winder Tooling Telecaster® Bridge Assembly Jig.
Telecaster® is a trademark of Fender Musical Instruments Corporation.
Winder Tooling is not affiliated with, sponsored by, or endorsed by Fender.
The trademark is used solely to identify product compatibility.