WT-ST — Stratocaster Assembly Jig

The WT-ST securely aligns the top and bottom flatwork while the pole pieces
are installed, maintaining consistent spacing and coil geometry while leaving
the final pole-piece stagger entirely up to the builder.

Pole piece diameter	0.187 in / 4.75 mm
Low-E to high-E spread	2.04 in / 52 mm
Top flatwork thickness	0.062 in / 1.57 mm
Bottom flatwork thickness	0.093 in / 2.36 mm
Coil space (inside-to-inside)	0.44 in / 11.1 mm
Total stack	0.59 in / 15.03 mm

Designed around traditional Stratocaster-style single-coil pickup geometry
for consistent flatwork and pole-piece alignment at the assembly bench.

Jig only.
Flatwork, pole pieces, magnets, wire, and other pickup components shown in
demonstration photos are not included.